Our Eavestrough Products

---

We use metal hangers and screws to attach our eavestrough to your house. No nails to pop out and loosen your trough from your fascia, no big spike holes in your fascia. 

Royal Eavestrough always uses outlets , Aluminium ring that goes in the hole where down spout connects to

Our eavestrough is continuous, meaning there is no joints if we need a 20' piece it will be one piece, no joints. The only place we have to put a joint is on corners, where there has to be a seam. Our eavestrough machines are in a cube vans so totally mobile and all troughs are formed on the job site . We also have generators in case there is not power at the site.

We usually use 2 5/8 X 2 5/8 down pipe. We also have available larger sizes if necessary

Alu-Rex Gutter Clean System. This system covers the top of your eavestrough. Leaves, pine, spruce needles will not get inside your trough. Just dust and shingle gravel that will not plug your down pipes.

The soffit  has all the little holes. When you walk out of your house and look up you will see the soffit.  When replacing the soffit the fascia has to also be replaced. Soffit comes in many colours.

Fascia comes in 6" or 8". in many colours.Fascia is what the eavestrough is screwed on too. If replacing the fascia you do not have to replace the soffit. 

Snow Guard  is screwed on your tin roof  usually the second row of screws from the lower edge. It stops the snow  and ice from sliding off  the roof. 

Aim-a- Drain  is an elbow with a swivel so you can turn it. It is made of plastic and comes in white only.